A compression test is one of the most useful engine checks: it shows whether each cylinder can seal and build pressure. Low or uneven compression points to worn rings, burnt valves or a head gasket problem, and helps you decide whether an engine is worth repairing.
This guide explains how to run the test and read the numbers, and compares six testers using the details their makers list. Several near-identical generic 8-piece kits from the earlier version of this guide were cut to one.
What you’ll learn
- How to run a compression test
- What good and bad readings look like
- Screw-in vs push-in adapters
- Which of six testers suits you
Quick answer
For a durable, complete gasoline kit, the OTC 5605 Deluxe includes a deep-well connector and a Ford Triton adapter. The Lisle 20250 is a simple, trusted gauge for 14 and 18 mm plugs. On a budget, the BETOOLL 13pc kit has 10 adapters, and the AZUNO Digital tester gives precise readings. If you also work on diesels, you’ll need a kit like the XSTARYE 46PCS, because gasoline gauges can’t handle diesel pressures.
In this article
How to choose a compression tester
How the test works
Warm the engine, then switch it off and disable fuel and ignition. Remove all spark plugs, screw the tester into one plug hole, hold the throttle wide open and crank the engine for about four to six compression strokes. Record the reading, release it and repeat for each cylinder.
Reading the results
Compare cylinders with each other and with the maker’s specification. As a general guide, many technicians look for all cylinders to be within about 10–15% of each other. If a low cylinder rises after a few drops of oil (a “wet test”), suspect the rings; if it doesn’t, suspect the valves or head gasket.
Adapters
Screw-in adapters give the most reliable seal. Check that the kit covers your plug threads (commonly 14 mm, also 10, 12 and 18 mm) and has a long enough hose for deep plug wells.
Gasoline or diesel
Gasoline testers usually read up to 300 psi. Diesel engines run far higher compression and need a diesel gauge and glow-plug or injector adapters.
Gauge and release valve
A clear gauge and a release (bleed) valve make repeat tests quick. Digital gauges are easier to read precisely.
Quick comparison
| Model | Type | Best for | Key features (from the maker’s listing) | Amazon |
|---|---|---|---|---|
| OTC 5605 Deluxe Compression Tester Kit | Gasoline kit | Frequent use and modern engines | Common adapters plus a deep-well connector for recessed plug heads and a 16 mm Ford Triton adapter; works with flat and tapered seat plugs; nickel-plated parts; 2-1/2 in 0–300 psi gauge with protective boot; 25 in flex hose with quick coupler | Amazon |
| Lisle 20250 Compression Tester | Gasoline gauge | Basic DIY testing | Gauge reads 0–300 psi and 0–2100 kPa; fits 14 mm and 18 mm thread sizes | Amazon |
| BETOOLL 13pc Compression Tester Kit | Gasoline kit | Covering many engines cheaply | 10 adapters; 0–300 psi, 0–20 bar triple-scale gauge; release valve; two spark plug testers; gasoline engines | Amazon |
| BETOOLL HW0130 8pc Compression Tester | Gasoline kit | Occasional checks | 3 in dual-scale gauge, 0–300 psi; side release button; 2 rubber cone ends for push-in checks; 17.7 in hose with 10, 12, 14 and 18 mm adapters | Amazon |
| AZUNO Digital Compression Tester | Digital gasoline gauge | Precise readings | Digital gauge up to 200 psi with 0.1 resolution (listed within 1%); backlit LCD with 4 units; bleeder valve; auto off; 4 adapters; steel and brass; 1-year warranty | Amazon |
| XSTARYE 46PCS Gasoline and Diesel Compression Tester Kit | Gas and diesel kit | Diesel engines and workshops | Gasoline and diesel compression gauges; dual-dial cylinder leakage tester with 1/4 in air inlet; glow plug, spark plug and other adapters | Amazon |
The six compression testers compared
How we chose: we compared these testers using the details each maker lists on Amazon (checked in November 2026): gauge range, adapters, hose length and extras. We have not tested these tools ourselves.
1. OTC 5605 Deluxe Compression Tester Kit
OTC’s deluxe kit is designed for gasoline engines and includes a deep-well connector for recessed plug wells and an adapter for Ford Triton engines, plus common adapters for flat and tapered seat plugs.
The 0–300 psi gauge has a chrome bezel and protective boot, and the 25-inch flex hose with a quick coupler lets you read it clear of the engine.
Why it’s a good pick
- Covers awkward modern plug wells
- Durable, protected gauge
- Long flex hose
Keep in mind
- Gasoline engines only
- Higher price
2. Lisle 20250 Compression Tester
Lisle’s 20250 is a straightforward compression gauge from a long-established tool maker. It reads 0–300 psi and fits 14 mm and 18 mm spark plug threads.
It’s a good choice if your engine uses standard 14 mm plugs without deep wells.
Why it’s a good pick
- Trusted brand
- Simple to use
- Low price
Keep in mind
- Only 14 and 18 mm
- May not reach deep plug wells
3. BETOOLL 13pc Compression Tester Kit
BETOOLL’s 13-piece kit includes 10 adapters for a wide range of engines, a triple-scale 0–300 psi gauge with a release valve, and two spark plug testers for checking ignition at the same time.
It’s listed for gasoline engines only.
Why it’s a good pick
- Many adapters
- Spark testers included
- Good value
Keep in mind
- Gasoline only
- Budget build quality
4. BETOOLL HW0130 8pc Compression Tester
A low-cost 8-piece kit with a 3-inch gauge, a 17.7-inch hose and adapters for 10, 12, 14 and 18 mm plugs, so it covers cars and small engines.
Two rubber cones let you do a quick push-in check, though screw-in adapters give more reliable readings.
Why it’s a good pick
- Very low price
- Four thread sizes
- Quick push-in option
Keep in mind
- Push-in cones are less accurate
- Basic gauge
5. AZUNO Digital Compression Tester
AZUNO’s digital gauge shows readings to 0.1 on a backlit screen and can switch between four units, which makes comparing cylinders easy.
It includes four adapters and a bleeder valve, and AZUNO lists a one-year warranty. Note its 200 psi range, which suits most gasoline engines but not high-compression or diesel engines.
Why it’s a good pick
- Precise digital reading
- Easy to compare cylinders
- Warranty
Keep in mind
- 200 psi maximum
- Needs batteries
6. XSTARYE 46PCS Gasoline and Diesel Compression Tester Kit
This 46-piece kit combines gasoline and diesel compression testing with a dual-dial cylinder leakage tester, so one case covers three tests.
It includes glow plug and spark plug adapters and a diesel pressure gauge for higher compression pressures.
Why it’s a good pick
- Works on diesels
- Leak-down tester included
- Lots of adapters
Keep in mind
- Highest price here
- More than gasoline-only owners need
Verdict
For gasoline engines, the OTC 5605 Deluxe is the best long-term kit, and the Lisle 20250 is a simple, trusted gauge for standard plugs. On a budget, the BETOOLL 13pc kit covers the most engines, and the AZUNO Digital gives the most precise readings. For diesels, choose the XSTARYE 46PCS kit.
Found a weak cylinder? Pinpoint the cause with a cylinder leak-down tester, and read about the purpose of a compression test.
Related guides: best automotive vacuum gauge.
Frequently asked questions
Sources
- Manufacturer product listings on Amazon (kit contents and specifications), checked November 2026
- Compression ratio (Wikipedia)










