DIY Job Planner: What Do You Need for This Car Job?

Planning a DIY car job? Pick the job below, tick the tools you already own, and the planner shows what you still need, how hard the job is, and which numbers to look up for your own car before you start. It is free and needs no sign-up.

How the DIY Job Planner works

  1. Pick a job and answer the short questions. The list changes with your answers. For example, Torx caliper bolts add a Torx bit set, and replacing rotors adds a dead blow hammer and an impact driver.
  2. Tick the tools you already own. The planner crosses them off and counts what is still missing. It remembers your garage in this browser, so the next job starts with your tools already ticked.
  3. Look up the numbers for your car. The planner lists which specs to find before you start (torque values, oil grade and capacity, tire pressures) and where to find official figures.
  4. Check for recalls. Choose year, make and model to see recalls listed by NHTSA for that model.

When you are ready, print the job sheet and take it to the garage, or copy a link to share the plan.

Why the planner doesn't show torque specs or fluid capacities

Lug nut torque, caliper bolt torque, oil capacity and fluid types change between models, engines and even model years. Generic charts online often disagree with each other, and a wrong value on brakes or wheels is a safety problem. So the planner tells you which numbers to look up and points you to official sources (your owner's manual, the factory service manual, or the free Chilton and ALLDATA access many public libraries offer) instead of printing numbers that might not match your car.

Jobs in the planner

  • Oil and filter change: drain pan, filter wrench for spin-on or cartridge filters, funnel, and either ramps or a floor jack with jack stands. Not sure which lifting method to use? See jack stands vs ramps.
  • Front brake pads (disc brakes): floor jack, jack stands, breaker bar, torque wrench, caliper piston compressor, brake cleaner and brake-rated caliper grease, plus Torx or hex bits when your calipers need them. Related: how to inspect brake pads and ceramic vs semi-metallic brake pads.
  • Tire rotation: two or four jack stands depending on the rotation pattern, a breaker bar, a torque wrench and a tire pressure gauge. Related: how to use a torque wrench correctly.

More jobs, such as spark plugs, battery replacement, engine air filter and cabin air filter, will be added over time.

Frequently asked questions

Is the DIY Job Planner free?

Yes. It is free to use and needs no account or email address.

Does the planner save my information?

Only the list of tools you tick, and only in your own browser. It is not sent to us. If you use the recall check, the year, make and model you choose are sent to NHTSA to look up recalls. The planner never asks for your VIN.

Have you tested the products in the planner?

No. The example picks are popular, highly rated Amazon listings we found in November 2026. We have not used them ourselves. Parts that depend on your car, such as brake pads, oil filters and engine oil, open an Amazon search so you can check fitment for your exact vehicle.

Where can I find the torque specs for my car?

Start with your owner's manual, which usually lists lug nut torque. For caliper bolts and drain plugs, use the factory service manual. Many US public libraries give free online access to Chilton or ALLDATA repair databases with a library card.

Does the recall check cover my exact car?

It shows recalls NHTSA lists for the year, make and model. Some may not apply to your car, and some may already be repaired. To check your exact car, enter your 17-character VIN at nhtsa.gov/recalls.